Process Instruments (Pi) has seen a sharp increase in interest around monitoring and controlling Peracetic Acid levels for disinfection purposes in recent months. This interest has been particularly focused around the food industry with Peracetic Acid now being seen by some as a replacement for traditional Chlorine based disinfection products.
Pi Controllers Now Compatible with Peracetic Acid Sensors
Pi is pleased to say that our existing range of controllers (CRONOS® and CRIUS®) can now also be equipped with Peracetic Acid sensors. These probes are available in different ranges (0.5-200mg/l, 5-500mg/l, 5-1000mg/l, 5-2000mg/l, 50-5000mg/l, 50-10000mg/l) and like all Pi’s probes are the most reliable and robust on the market. Pi’s Peracetic Acid sensors can also be combined, if required, with multiple other probes to monitor several parameters all on one controller, such as pH, conductivity etc.
Pi’s Peracetic Acid probes have been shown by our customers to have far faster response times than our competitors and when combined with our intelligent PID control option gives unrivaled Peracetic Acid level control. Pi’s intelligent PID control algorithm allows the user to set the ‘exact’ desired level of Peracetic Acid and the controller automatically adjusts dosing levels to maintain that exact disinfectant level; no longer is it necessary to have disinfectant levels bouncing between high and low set-point (threshold) levels.
If you would like more information on Process Instruments Peracetic Acid (PeraSense) range or have a different application that you would like to discuss then please do not hesitate to get in touch.