Wet Stack Emissions Analyzer

KEY BENEFITS

• Measures in a wet stack
• Monitors up to three different gases
• Can handle the most difficult gases such as HF, and HCl
• Can be mounted in a hazardous area
• Is a fraction of the cost of other systems
• Has a fantastic record on reliability
• Comes with an Internet ready, datalogging controller that can SMS text alarms to your mobile (Crius GS1 Controller)

Installed Applications

• HF in glass manufacturing
• HCn in chemical works
• HF in plastics manufacturing
• Cl₂ in steel manufacture
• HCl in pickling plants
• Cl₂ in agrochemical manufacture
• Cl₂ in cleaning chemical manufacture
• SO₂ Agrochemicals
• HF Emissions Analyser in HF manufacture
• NH₃ Emissions Analyser in ammonia manufacture

Gases Monitored

• HF Hydrogen Fluoride
• HCn Hydrogen Cyanide
• Cl₂ Chlorine
• HBr Hydrogen Bromide
• Br₂ Bromine
• F₂ Fluorine
• SO₂ Sulphur Dioxide
• H₂S Hydrogen Sulphide
• NH₃ Ammonia
• Ask us for more

Emissions Monitor APPLICATIONS
Anywhere there is a wet stack with acid gas emissions there will be problems trying to continuously monitor them. The GS1 overcomes the problems of corrosion and condensation by using a sophisticated dryer that selectively removes water vapour leaving behind the gas of interest in the sample stream for measurement by an electrochemical sensor. By utilising specific materials and by achieving all of this with no moving parts Process Instruments have created a reliable, and accurate monitor of acid gases in wet stacks.

Emissions Analyser SYSTEM OPERATION

The GS1 Wet Stack Emissions Analyser comprises three parts; the probe (including sample line), the main unit, and the Crius electronics.

The probe is custom designed by Process Instruments (UK) Ltd for the GS-1. It is available in 3 sizes (150mm, 300mm and 450mm length) to suit the individual application. Connecting the sampling probe to the GS1 is a Teflon sample line. The line is heated to prevent the loss of soluble gases through condensation. The GS1 main unit utilises a highly sophisticated gas dryer that selectively removes water vapour and retains the gas to be monitored. The dryer is maintenance free, has no moving parts and is corrosion resistant. After the sample has been dried it can be allowed to cool without condensation. The sample gas is then monitored using electrochemical sensors. The intrinsically safe gas detectors incorporate stable electrochemical gas diffusion sensors and microprocessors in a single assembly. Up to three sensors can be mounted in the main unit, each providing a 4-20mA output that is directly proportional to the concentration of each gas of interest. From there the signals are taken to the Wet Stack Gas Emissions Monitor Crius electronics unit, the main features of which are detailed below.

WET STACK CRIUS KEY BENEFITS

• Low purchase cost
• Low cost of ownership
• SMS text alarms
• Webserver
• Bluetooth
• 4-20mA and relay Outputs
• Modbus
• Data logging

Downloads: Brochure